How to keep fowl feed pellet making maker in everyday use?

Ring die poultry feed pellet making  equipment ( likewise known as ring die granulator, ring die poultry feed pelletizer)  comes from pellet  gas granulation  devices. It is a processing  equipment that directly presses  smashed  products such as straw, soybean meal, straw, peanut husk, rice husk  right into granules.

Ring die  chicken feed pellet making machine is a SZLH series  devices with good production  as well as  top quality.  As a result of the  intricate  style and structure of the poultry feed  device  as well as high  upkeep  needs,  normal  upkeep  ought to be  carried out to  make certain the normal operation of the equipment.

Related post: poultry feed manufacturing plant cost

1. Notes on  everyday  upkeep:
( 1) The  recurring  products in the poultry feed pellet making  device are  usually  gotten rid of  to stop the residual  products from  wearing away the ring die;
( 2)  Prior to operation, the equipment should be filled with lubricating oil to  lower the high temperature of the  body  triggered by  tools friction;
( 3) Always  inspect whether the  void between the ring die  and also the pressing roller is within the normal range;
( 4)  Routinely check the  rigidity of the triangle tape  and also adjust it in time;
( 5) The  surface area of the  chicken feed pellet making  device  must be  tidy  and also  sanitary, and  demanding cleaning the  body of the poultry feed pellet making  equipment can  avoid the  outside of the  body from rotting.
( 6) When the  gadget is  devoid of  fragments.  Inspect whether the material hole is normal.  Otherwise, you can drill holes with a hand drill.  Take notice of the water  web content of the stirring  product,  as well as  change the gap between the  internal wall of the ring die  as well as the roller;

( 7) The pellet  developing  price is low. The  factor is that the  dampness  web content of the  product is too low, and the  wetness  material of the powdery  product should be  raised;
( 8) The pellet  surface area is rough.  Focus on the refueling  products,  quit the cycle extrusion  as well as  altercation, and  accomplish the  routine brightness;
( 9) The  result is  as well low. If the feeding is not enough, the opening of the feeder  entrance can be  enhanced. If the  void  in between the inner  wall surface of the ring die  and also the roller is  as well  huge, the gap can be adjusted to  regarding 0.15 mm. If the powder is agglomerated in the ring die, the  pile in the ring die sleeve can be  eliminated.

Related post: 

https://www.pellet-richi.com/feed-pellet-machine/poulty-feed-pellet-production-line.html

2. Which ring die  fowl feed pellet making  equipment is  much better?
All kinds of  fowl feed  equipment  as well as  tools  generated by Richi Pellet  Equipment are cost-effective, low  power  intake,  steady  and also  reputable, easy to  run,  develop in system  modern technology,  portable in  framework,  and also one-stop service for complete set of feed  complete  tasks; Richi Machinery is  completely equipped:  chicken pellet  maker, feed crusher, mixer, expander, cooler, stabilizer, crusher, ring die accessories, electrical control system, etc 3. What should be  focused on when  selecting a  chicken feed pellet  maker?
( 1)  Take a look at the poultry feed pellet making machine  supplier
If it is a  large or retail farmer, if conditions  allow, you can directly  inspect the  toughness of the  producer by car. Seeing is believing,  however hearing is  incorrect. It all  relies on the real grain  impact you see in the  examination  equipment.

( 2) Look at the  examination
As long as the  product packaging  producer  should have a bad  credibility, as farmers, they should know the  supplier's  track record in the  sector  based upon the market list  info for the first time, and give themselves some  peace of mind.
( 3) Look at the  item
The  chicken feed  handling  tools is not big or  little,  and also it is  likewise one thousand yuan to  acquire. After  buying, the  initial  examination  should be  executed to see whether the overall product granulation  impact can  fulfill the  acceptable  outcome standard.
 Basically, the  different poultry feed pellet making  makers on the market make farmers do not know  just how to  pick. As a  chicken feed  equipment  producer, the author  advises most farmers that it is  the very best to  select the feed processing that suits them.

Related post: poultry pellet machine
4. The  technique of  appropriate  change of  fowl feed machine press roller

Ring die is a ring die accessory die  furnished with ring die  chicken feed pellet making  equipment. The materials  usually  utilized to make ring die are alloy steel, carbon steel  as well as stainless steel. The ring die is an  necessary  device of the  fowl feed pelletizer,  and also  making use of the ring die will  straight affect the  life span of the ring die  and also the  high quality of the  ended up pellet feed.

 Modification of the  space between the ring die and the pressure roller For the  modification of the gap between the new ring die}  as well as the pressure roller, the ring die  as well as the  acme of the pressure roller  ought to be  a little contacted,  as well as the  stress roller  need to be in a state that does not turn. If the adjustment is made under the  fowl feed pellet making machine working state, the  stress of the ring die  and also  journalism roller can be appropriately increased,  yet it  should be  dropped in moderation.

The  space  in between the ring die and  journalism roller is  as well  big, and the pressing roller can not  turn,  leading to  clog of the  chicken feed pellet making  equipment. If the  space  in between the ring die  as well as the  stress roller is too  little, it  will certainly  raise the  deterioration of the ring die  and also the  stress roller,  boost the  tons,  and also  create  damages to the ring die  as well as the pressure roller in  extreme cases.

The  void  in between the ring die  and also  journalism roller  must be checked in time,  at the very least once every  4 working hours. When  readjusting each pressure roller,  take notice of the  change  instructions of each pressure roller,  to make sure that the  minute sum of each pressure roller  about the shaft of the poultry feed pellet making machine is  no,  to ensure that the  fowl pellet making  device is not  influenced by asymmetric force. see

 Properly  mount or  change ring die  as well as  press roller. Generally, the new mold is equipped with a new roller, and the old  mold and mildew is equipped with an old roller,  to make sure that the surface shape of the ring mold  and also the pressure roller is close to the shape of the profiling state, and the local  space  in between the ring mold  as well as the  stress roller is roughly the  exact same. In this way, the  anxiety and discharge of the entire ring die are  extremely  consistent, which can improve poultry feed pellet making  device production  performance.

 Group maintenance. Pre-shift  assessment  must be carried out  for every shift,  examine all transmission components,  tools  and also valves,  include lubricating oil with lithium-based lubricating oil, and  eliminate iron filings from iron  devices.

 Prior to assembly,  cleansing should be done to ensure that all mating  surface areas are clean. Pay special attention to the  cleansing of the annular die screw holes. If the  product in the ring die screw hole is not clean, it is easy to cause cracking of the ring die  screw hole when  tightening up the ring die bolt. Tighten the  chicken feed pellet making  device ring die bolts with a torque wrench to  guarantee the specified  tightening up torque.

When assembling the pressure roller, pay attention to the  examination of the bearing. Once damaged, it  needs to be replaced in time. After the poultry feed pellet making machine rollers are assembled,  ensure that there is a  particular gap  to make sure that the rollers can rotate  openly. The  stress rollers  should be  full of oil  in a timely manner every shift.  As soon as the pressure roller  lacks oil, the bearing and the  stress roller shaft  will certainly be  melted,  as well as the entire pressure roller  will certainly be  ditched in  significant  situations.

For details please contact: feed mill manufacturer
WhatsApp：86 138 3838 9622
Email：enquiry@pellet-richi.com