Ways to pick a drifting fish feed equipment
For more details:
Email Address: enquiry@pellet-richi.com
Phone/Whatsapp: 0086-13838389622
In the last few years, with the rapid development of the economic climate, the drifting fish feed device has actually followed closely, and the fish feed pellet maker has been demanded by every person. After that there is a problem, that is, just how to choose the drifting fish feed device Allow's assess the 3 methods of picking a fish feed pellet device.
1. Methods to select a drifting fish feed device.
( 1) Look high quality.
The spray paint on the surface of the shell of the floating fish feed machine device must be uniform and firm, and there must be no paint leakage, sagging and diminishing. The chrome-plated parts should be firm as well as brilliantly refined, free from peeling and corrosion. Stainless-steel parts must have a smooth surface, no bumps, and also should be refined with neat refined patterns.
( 2) Setting up and also attachment
In addition to examining the attachment of the body as well as the chassis, the electric motor (or diesel engine) and the framework, the floating fish feed device generally checks the setting up quality of the design template securing nut and also the pellet cutter, and also the ring die drifting fish feed machine primarily checks Whether the securing bolts of the design template are tightened up. As well as inspect the rigidity of the pinch roller bracket and also squeeze roller.
Related post: Shrimp Feed Pellet Machine
( 3) Readjust the space between the die as well as the pressure roller wall surface.
2 layers of paper are stuffed in between the pressure roller as well as the internal wall surface of the ring die, as well as it can be taken out with a little force. After modification, be sure to tighten the changing nut in time and also install the safety cover.
After confirming that there are no foreign items in the guard as well as the ring die, transform the ring die by hand. At this time, the driven pin should revolve quickly, and there is no sticking phenomenon or massaging noise.
2. Notes:
Straight observe whether there is pounding of the floating fish feed machine ring die during rotation and whether it will certainly rub against other components. Open the observation port for feeding the powder right into the turning cage and inspect whether there is any type of contaminant in the turning cage.
Turn the cage shaft by hand, the cage shaft ought to turn efficiently and there is no rubbing sound. Repetitively open and also close the ring-molded storehouse door to check whether it is simple to open and shut as well as securely shut.
Related post: fish feed plant
Specific interest needs to be paid to inspecting the rigidity of the joint and also the integrity of the locking. The general demands are: exact placing, strong locking, and no leakage of powder.
After securing the press chamber door, observe the seam seal of the chamber door from the side. If there is a area where the seal is not tight, the taking care of bolts of the door hinge of the stockroom can be gotten used to properly prevent the leakage of powder.
3. Intro of floating fish feed machine
The drifting feed extruder equipment is a feed processing maker that directly presses pellets from crushed materials such as corn, soybean meal, straw, grass, rice husk, etc( 1) Classification of drifting fish feed pellet machine
drifting fish feed device can be separated right into ring die pellet equipment, ring die pellet device as well as counter-roll pellet device; according to production, it can be divided into: straw feed pellet machine, wheat bran feed pellet maker, soybean meal feed pellet maker, corn straw feed pellet device, Sawdust feed pellet device, and so on.
A range of various floating fish feed makers are classified according to their appearance as well as production approaches.
( 2) Main performance features of floating fish feed maker
- Dual shaft differential stainless-steel conditioner, approximately 12 points of steam and 6 points of fluid enhancement;
- Incorporated pin, very easy to keep and repair the bearing housing;
- The screw as well as the main shaft are linked by involute splines, which are very easy to adjust as well as replace;
- The barrel is installed with a wear-resistant bushing and also is equipped with a return water network, which can be heated/cooled, as well as can also straight infuse heavy steam or cold water right into the barrel;
- Spiral made of unique wear-resistant product, big facet ratio can make sure continuous as well as secure manufacturing of sinking/floating feed of different pellet sizes;
- Practical and fast die substitute mechanism and also online adjustable cutting tool;
- Specifically suitable for the production of 2 ~ 6mm drifting pellets.
After the product is extruded by the floating fish feed maker, it will certainly develop soft and also soft pellets (the dampness material is 25%~ 30%). At this time, it is far better to make use of pneumatic conveying rather than lift.
Due to the fact that the use of elevators can conveniently trigger the pellets to be damaged and also boost the pulverization rate; making use of pneumatically-driven conveying can not just rapidly create a layer of colloidal covering externally of the pellets to lower the fragmentation of the pellets, however likewise round the shape of the pellets.
More details:
https://www.pellet-richi.com/fish-feed-extruder/floating-fish-feed-machine.html
Because of its high dampness content, the material conveyed by pneumatically-driven must get in the dryer for drying, to ensure that the dampness material of the material is lowered to about 13%.
I wish the above relevant material regarding floating fish feed maker is practical to you. For more information regarding drifting fish feed pellets equipment, you are welcome to speak with the staff of Richi Machinery, we will certainly serve you wholeheartedly!