Frequently asked question from consumers who acquire wood pelletizer maker
For more details:
Email Address: enquiry@pellet-richi.com
Phone/Whatsapp: 0086-13838389622
( 1) How to make the mold and mildew life much longer?
With the continual introduction of wood pelletizer machine into the marketplace, the growth of mechanical tools is additionally constantly changing. The damage of the mold and mildew during the production of wood pellets is also a significant expense. So, how to maintain it straight impacts the life span of the timber pellet making equipment. For that reason, it also straight influences the handling expense of wood pellets. Just how to make the mold life of the wood pelletizer equipment device much longer? Get your response today!
① Frequently tidy oil and fill
If the wood pelletizer machine is not used for a month, it is suggested to clean the oil inside, so the oil will progressively harden throughout long-lasting storage, which will certainly make it hard to get rid of the following time it is used, which will seriously affect the subsequent use the mold of timber pelletizer device.
Related post: wood pellet plants
After the pellets are refined, it is needed to utilize oil to grind for a period of time to make certain that all the oil remains in the die opening, which is of terrific advantage to the job the following day and is likewise for the long-term use of the die. The oil can be mixed with waste engine oil as well as timber chips. It can be made when and also can be recycled.
② No need to cleanse the mold and mildew for a long period of time
If the mold and mildew and squeeze rollers are no more utilized for a long period of time, it is advised to eliminate the mold after cleansing and also storage space. The master cleans the sawdust pellets inside the mould as well as complies with the mould surface. In this way, on the one hand, we can protect against the venture from being hard to remove the pellets due to the solidifying of the pellets because of the long-term storage space of the students. On the other hand, since the sawdust has water absorption, if the sawdust on the surface is not removed, it may increase the growth of the rust of the mold surface.
Related post: Germany 2-2.5T/H Wood Pellet Plant
③ The mold need to be saved in a dry and also aerated area
The majority of the mold and mildews of the timber pelletizer device are made of alloy steel. If they are in a moist place for a long time, the surface area of the mold may be damaged due to air rust, thus substantially reducing its service life.
④ The managing procedure should be careful
The mold of the wood pelletizer device is a high-precision component, and the mold hole is thoroughly processed according to the compression ratio of the mold. If you are careless throughout the managing procedure, the framework of the inner wall of the mold and mildew hole is harmed, which may result in molding throughout handling. reduced price and short service life.
The above are the pointers on just how to make the mold and mildew life much longer for wood pelletizer equipment Comply with these 5 techniques to maintain the mold and mildew, and I believe your mold will last much longer.
( 2) Why do the pellets generated by the wood pellets device have a poor look?
Why do the pellets produced by the wood pellet mill device look poor? Today we will certainly learn why. Throughout the manufacturing of timber pellet gas by the wood pellet production machine, there will certainly be a situation where the pellets have powder and also have a rough surface. At this time, it is likewise needed to check the tools data setups of the wood pelletizer equipment. Besides, what is the factor for this sensation?
Related post: RICHI pelletizer machine
Wood pellets trigger even more wood pellet powders, this feedstock can be caused by low moisture content, the dampness material of timber pellet equipment feed is usually between 12% and also ~ 15%. After readjusting the wetness web content of the raw material, the problem still exists, that is, the pressure roller die is seriously worn. When the inner surface area of the ring die of the wood pelletizer equipment is drastically put on or the fragment diameter requires to be altered, it needs to be replaced. The surface area of the sawdust pellets is harsh, which might be triggered by the too much moisture material of the raw material, or the preliminary use the mold and mildew. This issue can be fixed by adjusting the wetness material of the raw material, or by repetitively grinding the mold and mildew with the material.
To summarize, the reasons that the pellets generated by the timber pelletizing machine are not good in appearance are discussed today. I hope it will assist you when you use the wood pellet equipment once again. Over the years, Richi Machinery has actually focused on the research and development as well as manufacturing of wood pelletizer maker makers, biomass pellet equipments, sawdust pellet devices, gas pellet devices, timber handling equipment, drying out devices, cooling down devices as well as packaging devices.
( 3) Advised timber pellet maker.
There are many wood pellet mill device on the marketplace. Today, Richi Equipment will recommend some of them:
① The first type of small wood pelletizer machine
It is a brand-new kind of biomass power equipment separately created by our company's technological staff as well as has independent copyright rights. The timber pelletizer device is basic in structure, simple to run, secure in operation, and also can work continuously. Journalism pellets have the advantages of high thickness, high burning worth, reduced moisture and low ash web content. The wood pellet device equipment transmission takes on high-precision gear transmission, four collections of gears are attached, and the hydraulic oil delivery system can automatically circulate oil in between the transmission and the major shaft bearing. The service life of the primary shaft and also transmission gears.
The working parts of the timber pelletizer device die plate, stress roller) are made of alloy steel, and the hardness after heat treatment can get to more than 50, which guarantees the constant operation of the equipment and prolongs the service life of the entire wood pelletizer machine The digital control system of the primary engine embraces the worldwide standard setup of star-delta starting, and also the operation is extremely secure.
② The 2nd type of tiny wood pelletizer device.
Mostly suitable for granulation of crude fibers, such as corn stalks, sawdust, rice husks, cotton stalks, cottonseed husks, weeds and other plant stalks and manufacturing facility wastes. It is suitable for reduced temperature level granulation of organic bacterial plant food, natural plant food as well as substance plant food.
More details:
https://www.pellet-richi.com/wood-pellet-machine/wood-pellet-mill.html
Attributes of this wood pelletizer maker:
① The pressure rollers are evenly distributed, and the procedure is secure. At the same time, the pressing area is enhanced, as well as the manufacturing performance is boosted.
② The screw facility stress regulating structure is adopted, and also the timber pelletizer machine mold space can be huge or little, which is suitable for various materials to make sure the pressing impact.
③ This version is geared up with Φ6-Φ10mm diameter mold and mildews, which appropriate for granulation of different materials as well as achieve the best advantage.
For more details: Richi Machinery
Email Address: enquiry@pellet-richi.com
Phone/Whatsapp: 0086-13838389622